IMAS Analytics.AI
HomeSolutionsPeople counting & visitor analyticsXPERIO dashboardVisitor forecastingAI building energy managementIndustriesShopping mallsRetail chainsAirports & transport hubsOffice & commercial buildingsTry itProjectsInsightsAbout usPartnersContact us

DATA INTELLIGENCE

Using Shopping Mall Visitor Data in Leasing: Tenant Mix, Unit Location Value and Tenant Conversations Built on One Set of Numbers

Shopping mall visitor data tells you how many people enter the mall, go up to each floor and walk past each stretch of corridor. For a leasing team, it answers the question every tenant asks: "How many people walk past this location?" Answer from gut feeling and the negotiation usually goes to whoever bargains harder. Answer with numbers that are measured continuously and can be checked, and the mall and its tenants talk from the same data. This article walks through how to use visitor data in leasing step by step, from tenant mix and location grading to leasing packs for new tenants and renewal talks. If the different types of visitor numbers are new to you, start with the basics in our article What Is Footfall? What Shopping Malls Can Do With Visitor Numbers

Shopping Mall Visitor Data: How Leasing Teams Use It

What Questions Does a Leasing Team Need to Answer?

A leasing team does more than fill vacant units. It has to keep a mix of stores across the whole mall that draw people in and pass them on to each other. Each part of the job has questions that visitor data can help answer.

Leasing task Question to answer Visitor data that helps
Planning tenant mix Which store types belong together, and where should the anchors go? Walking routes between zones and floors, visitors per floor
Grading each unit's location How much better or worse is this unit than others? Passer-by traffic in front of the unit, split by weekday, weekend and time of day
Finding new tenants How do we prove a location's potential in a way tenants believe? Historical figures measured the same way throughout
Renewals and revised terms Did the tenant's sales change because of the location or because of in-store selling? Passer-by traffic, store entries and the store's conversion rate
Temporary space and event areas Where and when should booths or temporary stores go? Hourly occupancy and passer-by traffic
Reviving quiet zones Why don't people come up to this floor, and what should change first? Share of visitors going upstairs, time spent in the zone

Which Visitor Numbers Matter for Leasing?

Mall-wide totals give the big picture, but leasing needs detail down to the corridor and the unit frontage.

Number Where it is measured How leasing uses it
Mall entries Every entrance and exit The headline figure for tenant proposals and management reports
Visitors to each floor Escalators, lifts, ramps Compare upper floors with lower floors; place anchors so they lift upper floors
Passer-by traffic per corridor stretch Main and secondary corridors Grade the location of each unit
Store entries and capture rate Tenant storefronts Separate a location problem from a store problem
Time spent in a zone (dwell time) Zone entrances See which zones hold people and which are just routes through
Occupancy Event areas, food courts Time temporary stores and events to when people are actually there

See how to read time-in-area data in our article What Is Dwell Time in Malls and Stores?

1. Plan Tenant Mix From Real Walking Routes

Tenant mix is the choice of which store types a mall has, in what proportions and where. A long-standing leasing principle is to put anchors at opposite ends or on different floors so that people walk past other stores on the way. Visitor data shows whether that actually happens.

What to look for in the data:

  • How far people spread to upper floors. If many people enter the mall but few go upstairs, the upper-floor anchors may not be strong enough, or the way up is in the wrong place
  • Which corridors are dead ends. Corridors where people have to turn back usually get fewer passers-by than corridors that form a loop
  • Where people from each entrance go next. Entrances from the train station, the car park and the street bring different customers with different destinations
  • How well each anchor passes people on. Look at passer-by traffic in the corridors leading from that anchor, before and after it opens or closes

Example (hypothetical scenario): A mall moves a popular restaurant from the ground floor to the third floor. The leasing team compares escalator traffic to the third floor, and passer-by traffic in the corridor between the escalator and the restaurant, before and after the move, using the same day of the week. If more people go up to the third floor but traffic in other third-floor corridors does not rise, people are coming up for the restaurant and going straight back down. The next step is to decide which store types should sit along the way.

2. Grade Each Unit's Location: Look at Passer-by Traffic, Not Just Floor and Size

Many malls still grade locations mainly by floor and position on the plan. But units on the same floor can see very different passer-by traffic, for example a unit facing the escalator versus one at the end of a corridor. Passer-by data per corridor stretch lets you grade locations by how the space is actually used.

A simple method is to compare each corridor stretch's passer-by traffic with the mall-wide median, then group them into grades.

Location grade Passer-by traffic vs the mall median (hypothetical) Example positions
Prime location Clearly above the median In front of the main entrance, facing escalators, train station links
Secondary location Close to the median Middle stretches of main corridors
Location that needs help drawing people Clearly below the median Corridor ends, hidden corners, top floors

Points to remember when grading locations:

  • Use several weeks of data at least, and separate weekdays from weekends, because some locations are busy only at weekends
  • Match the time of day to the store type. A location busy in the evening suits a restaurant better than a store that sells mostly at midday
  • Review when the layout changes. An anchor opening or closing, a new link or renovation work can change a location's grade

Location grades support space pricing and tenant selection. Actual rents still depend on the market, the contract and each mall's own policy.

3. Build a Leasing Pack for New Tenants

Major tenants and multi-branch brands often ask for visitor data before they decide. A case study published by a sensor manufacturer in 2017 describes a Bangkok mall that used visitor counts per corridor to value its leasable space, and used visitor numbers as a key part of attracting a major anchor tenant.

A good leasing pack should include:

  1. Historical mall entries by month, split into weekdays and weekends
  2. Passer-by traffic in front of the proposed unit by hour on sample days, compared with other locations on the same floor
  3. Neighbouring stores and nearby anchors, with the routes people take to reach the unit
  4. Planned events near the unit, if any
  5. How the numbers are measured: which sensors, where they are installed, since when, and the fact that the figures are visits, not unique visitors

Point 5 is often skipped, but it matters most. Experienced tenants will ask where the numbers come from. A clear answer makes every figure in the pack more credible.

4. Talk to Existing Tenants at Renewal or When Sales Fall

When a tenant says sales have dropped because "there aren't enough people", the leasing team needs to find where the problem really is. Three layers of data help separate the causes.

What the data shows Possible meaning What to discuss with the tenant
Passer-by traffic in front of the store has fallen The location really has fewer people What the mall will do to bring people back to this corridor
Passer-by traffic is steady, but store entries have fallen The storefront is drawing fewer people in How the storefront, products or signage could change
Store entries are steady, but sales have fallen The conversion rate has dropped Staffing, products, pricing or checkout queues

This table keeps the conversation from turning into a blame game. If the location really has fewer people, the mall should take that on. If traffic is steady but fewer people come in, the tenant can see for themselves that the fix is in the store. See how to calculate store conversion rate in our article Retail Store Conversion Rate: How to Calculate It, and the metrics stores should track regularly in 8 Retail Store KPIs

Some malls send visitor reports to tenants on a regular basis, not just at renewal time. When tenants see the same numbers all along, renewal talks move faster and there is less to argue about.

5. Place Temporary Stores, Booths and Event Areas

Temporary space such as corridor booths, pop-up stores and event areas brings in income that can be adjusted faster than permanent units. Visitor data helps with this space in three ways.

  • Choosing the position. Put booths in corridor stretches with enough passers-by, but not where the corridor is so narrow that a booth causes congestion
  • Choosing the timing. Use historical hourly and daily data, or data from the visitor forecasting system, to schedule events for when people will actually come
  • Checking the effect on neighbouring stores. A booth that draws people well should increase passer-by traffic for the permanent stores around it, not block their frontage

See how to measure events fairly in our article Measuring Mall Events With Visitor Data

6. Visitor-Based Rent: Agree on the Numbers First

Some malls use visitor data as part of rent discussions (visitor-based rent), for example as evidence in rent reviews or to design special terms for quiet periods. This works when both sides have agreed the following in advance:

  • Which measuring points are the reference
  • What the figure means, such as visits, passers-by or store entries
  • How figures are handled if a sensor fails or the area is under renovation
  • Who checks the system's accuracy, and how often

Without that agreement, visitor numbers become something to argue over again every round.

Pitfalls When Using Visitor Data in Leasing

  1. Comparing locations measured in different periods. One unit measured during a festival and another during a normal period makes the first look better than it is
  2. Using mall-wide totals instead of unit-level figures. High mall entries do not mean every corridor has high passer-by traffic
  3. Adding up figures from several internal points. One person passes many points; the mall total should come from the entrances only
  4. Counting staff. Tenant staff often use back corridors and staff entrances, so define clearly how they are excluded
  5. Moving sensors without recording it. Figures before and after the move cannot be compared; run old and new positions side by side for a while
  6. Reading passer-by traffic as sales. Passer-by traffic shows a location's potential, but sales still depend on the store, its products and its service

Personal Data and Sharing Data With Tenants

The data used in leasing is aggregated, such as people per hour per corridor. There is no need to know who anyone is. The Xovis 3D sensors used by IMAS process data on the device and output numerical data only, with no biometric or personal data. When sharing data with tenants, define clearly what level each tenant sees, for example only their own storefront plus the floor average, and not other stores' figures. Read more about personal data in our article People Counting and the PDPA

How IMAS Supports Mall Leasing Teams

IMAS has looked after people-counting systems for many shopping malls in Thailand. See examples on our projects page

  • 3D people counting: ceiling-mounted, counting in and out directions separately in real time, at mall entrances, escalators, main corridors and storefronts, and tracking time spent in areas and crowded spots
  • XPERIO dashboard: brings every entrance, floor and zone onto one screen, showing passer-by traffic, capture rate, time spent in areas, occupancy and conversion rate when sales data is connected, comparable from daily to yearly. It includes an AI assistant you can question in plain language to explore trends and compare areas, and it can pass data on to other reporting systems. The platform is designed to help malls raise space productivity and their tenants' sales
  • Visitor forecasting: predicts visitor numbers ahead of time from historical visitor data, sales, seasonality and weather, for planning events and temporary space
  • Data consulting, such as using visitor data in rent models and analysing tenants' conversion rates

The numbers help leasing teams and tenants see the same picture. Decisions about which store goes where, what terms to set or whose lease to renew still belong to the team that knows the mall and its tenants best. See the overview on our shopping mall solutions page

Frequently asked questions

−How does shopping mall visitor data help with leasing?

It helps plan tenant mix from real walking routes, grade each unit's location, build leasing packs for new tenants, and separate whether a tenant's sales changed because of the location or the store.

+What is tenant mix?

It is the choice of which store types a mall has, in what proportions and where, so that stores draw people in and pass them on to other stores in the mall.

+Which numbers should be used to assess a store location in a mall?

Passer-by traffic in front of the unit or along the corridor stretch, split by weekday, weekend and time of day, compared with the mall median. Mall-wide totals should not be used instead.

+Should a mall share visitor data with its tenants?

Many malls choose to, because it puts conversations with tenants on the same data. But the level of data each tenant sees should be clearly defined, for example only their own store and the floor average.

+Do we need sensors at every storefront?

No. Leasing work can start with all entrances, escalators and main corridors, then add storefronts for tenants who want capture-rate data.

Want your leasing team to have location numbers that can be checked?

The IMAS team can survey your site, plan counting points at entrances, vertical circulation and main corridors, and set up a dashboard your leasing team can use day to day. Details and costs are given in the quotation.

Book a demo · See the XPERIO dashboard

References

  • Teledyne FLIR (2017). Case study of a people-counting system in a Bangkok shopping mall used to attract major tenants
  • CountMatters AS. XPERIO analytics platform. countmatters.com website
  • Xovis AG. Sensor technology. xovis.com website
  • Retail Insight AS. Visitor forecasting service information. retailinsight.no website