Dwell time is the time people spend in a given space, from entering to leaving. In a department store or retail shop, this number tells you how long customers "spend time" in your space. A density map (heatmap) shows where customers "gather". Both are used more and more by marketing and space-planning teams in shopping centres, but both are easy to misread, because a longer time is not always better. This article explains what they mean, how they are measured, how to read them alongside other figures, and examples of how they are used.

What Does Dwell Time Mean in Malls and Stores?
Dwell time literally means "time spent staying". In visitor analytics (footfall analytics), it is the length of time each visitor stays in a defined area. It can be measured at several levels.
| Level of space | Example questions answered |
|---|---|
| Whole shopping centre | How long do customers stay in the mall on average, and how do weekdays differ from holidays? |
| Floor or zone | How does the time customers spend in the food zone differ from the fashion zone? |
| Store | How long do customers who enter a store stay before leaving? |
| Specific spot | In front of a new product display, an event plaza, or a checkout queue |
The most commonly reported value is the average, but the median and the distribution, such as the share of people who stay under 2 minutes against those who stay over 20 minutes, often tell you more.
How Is Dwell Time Measured?
1. Anonymous movement tracking with 3D sensors Ceiling-mounted sensors see people as moving points within their coverage area, so they know when a point entered and when it left, without needing to know who the person is. This is accurate for areas that the sensors cover completely, such as a store front, a queue or a medium-sized zone.
2. Calculation from entries, exits and the number of people in the area For large areas such as a whole floor or an entire mall, use a simple principle:
Average time in the area ≈ average number of people in the area ÷ number of people entering per unit of time
Example (hypothetical figures): in the afternoon, a zone has an average of 300 people in it and 900 people enter per hour. The average time in the zone ≈ 300 ÷ 900 hours = 20 minutes. This works when every entrance and exit of the area is counted and the calculation period is not too short.
3. Mobile phone signals (Wi-Fi or Bluetooth) Usable for wide areas, but it only detects people who have the device switched on, and personal data needs more care than with methods that count purely as numbers.
What Is a Heatmap?
A heatmap, or density map, is a picture of a floor plan that uses colour to show where there are more or fewer people. Generally warm colours such as red or orange mean dense, and cool colours mean sparse. In retail there are 3 commonly used types.
| Type | What it shows | What it is used for |
|---|---|---|
| Occupancy heatmap | Spots where many people are present in a period | Finding crowded spots, placing staff and cleaning |
| Dwell heatmap | Spots where people stop for a long time | Finding spots that attract attention, or spots where people get stuck |
| Flow map | The direction and routes people walk most often | Planning walkways, and placing stores and signs |
A density map helps people who are less comfortable with numbers see the picture quickly, but it should always be read alongside actual figures, because the colours on the plan change with the time period and boundaries you choose.
How to Read Dwell Time: Longer Is Not Always Better
A practical way to read it is to look at dwell time alongside the outcome for that space, such as conversion rate for a store.
| High conversion rate | Low conversion rate | |
|---|---|---|
| Long stay | Customers are interested and decide to buy; the space is working well | Customers may not be finding the product, waiting for staff, or waiting in a long queue |
| Short stay | Quick purchase, normal for convenience stores or stores where customers know what to buy | Customers come in and are not interested; look at the products, prices or store layout |
For how to calculate conversion rate, see the article How to calculate conversion rate for a physical store.
What counts as "long" also depends on the type of space.
- Food courts, event plazas and seating areas. A long stay is a good sign, showing that customers are spending more time in the mall.
- Main walkways, in front of escalators, and entrances. A long stay usually means congestion, so look at people flow.
- Checkout queues, checkpoints and check-in points. A long stay is a poor experience, so aim to shorten it.
Examples of Use in a Shopping Centre (Hypothetical Scenarios)
Event plaza on level 1: A shopping centre runs an event for two weeks in a row. In the first week, many people enter the plaza but dwell time is short. In the second week slightly fewer people enter, but they clearly stay longer, and the stores around the plaza see more visitors. The marketing team therefore sees that the second week's event format helped the surrounding stores more, even though the plaza's visitor count was not the highest.
Walkway in front of the level 3 escalators: The density map shows a red spot on Friday evening, and dwell time at this spot is higher than on other walkways. An on-site check finds that a temporary booth is taking up walkway space. The team moves the booth and then measures again to see whether people flow has improved.
A store in a shopping centre: A fashion store sees that evening dwell time is getting longer but conversion rate is falling. Looking at it alongside customers per staff member, it finds that this is a period when staffing is short, so it adjusts the shifts to cover this period.
Common Mistakes When Reading Dwell Time and Heatmaps
- Looking only at the average. A small number of people who stay a very long time, such as someone sitting waiting for a friend, can pull the average up a lot. Look at the median and the distribution too.
- Counting staff as well. Staff are in the area all day, making dwell time and density higher than they really are.
- Unclear zone boundaries. If a zone edge cuts across a walkway, people walking past are counted as people in the zone.
- Incomplete sensor coverage. Blind spots that the sensors cannot see leave gaps in the time spent.
- Comparing different zones directly. A food court and a walkway mean different things by "long". Compare a zone against its own history, or compare zones of the same type.
- Reading colours on the plan without checking the time period. An all-day map can hide a congestion point that occurs for only one hour.
Anonymous Measurement and Personal Data
Measuring dwell time does not require knowing who a person is. The Xovis 3D sensors that IMAS uses have built-in processing and output numerical data, such as movement coordinates, with no biometric or personal data. The XPERIO platform is designed to measure visits and behaviour without using the identity of individuals in the analysis. Read more in the article People counting and the PDPA.
Measuring Dwell Time and Crowded Spots with IMAS

- 3D people-counting system. Counts the number of people entering a space in real time, and tracks time spent in the space and crowded spots.
- XPERIO dashboard. Shows indicators such as passers-by in front of the store, capture rate, time spent in the space, number of people in the space, and conversion rate when sales data is connected. You can compare from daily to yearly and between branches, and there is an AI assistant you can ask in plain language to see trends and compare spaces.
- For spaces with queues and heavy people flow, Xovis sensors can detect queues as they form and the number of people in the space in real time. See the use cases in airports and transport hubs.
The data helps point to which spaces to look at first. Decisions on how to adjust the layout, move a booth or change an activity remain with the team that knows the on-the-ground context. For an overview for shopping centres, see the solutions for department stores and shopping centres page.
Frequently asked questions
−What is dwell time in a shopping centre?
It is the time a visitor stays in a defined area, such as the whole mall, a floor, a zone or a store, from entering to leaving.
+What is a heatmap, and how is it different from dwell time?
A heatmap is a picture of a floor plan that uses colour to show where it is crowded. Dwell time is a figure for how long people stay in an area. The two can be used together, for example a dwell heatmap, which shows where people stop for a long time.
+Is a longer dwell time always better?
Not always. In a food court or event plaza, a long stay is a good sign, but on a main walkway or in a checkout queue, a long stay usually means congestion. Read it together with the type of space and an outcome such as conversion rate.
+Do I need cameras that see people's faces to measure dwell time?
Not necessarily. 3D sensors track movement as anonymous points and output numerical data.
+What is footfall analytics?
It is the analysis of visitor data, such as the number of people entering, time spent, walking routes and crowded spots, to inform decisions on space, staffing, marketing and service.
Want to See How Customers Spend Time in Your Space?
The IMAS team helps design sensor positions, define zones and set up dashboards that marketing and space-planning teams can actually use. Details and costs are provided in a quotation.
References
- Xovis AG. Sensor technology and PC-Series Selection Guide (2024). Website xovis.com
- CountMatters AS. XPERIO analytics platform. Website countmatters.com
- Little, J. D. C. (1961). A Proof for the Queuing Formula: L = λW. Operations Research 9(3):383–387. doi: 10.1287/opre.9.3.383
